larger image   Tracker 3000 Floor Stripper/Scrubber Tracker 3000 deeply strips/scrubs in a 30” path with two 16” counter rotating brushes removing multiple layers of floor finish easily with its propane powered engine. Run time is 5 to 6 hours per propane cylinder. Available with your choice of Kawasaki or Robin engines. Emissions protected by three-way catalytic muffler. Emissions shut down system, two 16” pad drivers, and solution tank kit are available options. All machines come standard service alert (hour) meter, two gear driven Strata Grit Plus 16” stripping brushes, easy change brush to pad drivers, transport wheel, adjustable handle, and aluminum safety-fill fuel cylinder with overfill prevention device (OPD) (UL and DOT approved). Note: All Engines Exceed Environmental Protection Agency (EPA) AND California Air Resource Board (CARB) regulation for exhaust emissions. Deep scrub or strip 30” cleaning path Two 16” gear driven brushes Low profile 4” deck No-flat 10” tires Centrifugal clutch Gear box driven EPA & CARB approved   Item 680267 Tracker 3000 - 17HP Kawasaki   680570 Tracker 3000 - 22HP Robin   Production 20000 ft² / hr   Power Kawasaki 17HP (585 cc) hp   Robin 22HP (653 cc) hp   Engine Speed 3200 rpm   Cleaning Path 30 in.   Brush Speed 320 rpm   Brush Size Two-16” counter rotating brushes   Two 16” counter rotating brushes   Head Pressure 350 lbs   Machine Dimensions (L x W x H) 53" x 30.5" x 42"   Options 680023 - Two 16" Pad Drivers 680029 - Replacement Strip brush - (2 Set) 680045 - Transport Wheel Bracket w/Caster 681532 - Tracker Solution Tank Kit   Options (Factory Installed) 600590 - Kill Switch 680275 - Automatic Shut Down System   Total Weight 450 lbs   Approval EPA and CARB   MSRP $7,708.00 $8,077.00